MIT researchers have successfully engineered a compact, low-power receiver for 5G-compatible smart devices, 30 times more resilient to a certain type of interference compaerd with some traditional wireless receivers.
This low-cost receiver would be ideal for battery-powered IoT devices like environmental sensors, smart thermostats, and other devices that need to run continuously for a long period of time, such as wearables, smart cameras, and industrial monitoring sensors.
The researchers’ chip utilises a passive filtering mechanism that consumes less than a milliwat of static power while protecting both the input and output of the receiver’s amplifier from unwanted wireless signals that could jam the device.
Key to the new approach is a novel arrangement of precharged, stacked capacitors, which are connected by a network of tiny switches. These switches need significantly less power to be turned on and off than those used in IoT receivers.
The receiver’s capacitor network and amplifier are arranged to leverage a phenomenon in amplification that enables the chip to use much smaller capacitors than required.
“This receiver could help expand the capabilities of IoT gadgets. Smart devices like health monitors or industrial sensors could become smaller and have longer battery lives. They would also be more reliable in crowded radio environments, such as factory floors or smart city networks,” said Soroush Araei, an electrical engineering and computer science (EECS) graduate student at MIT and lead author of a paper on the receiver.
He is joined on the paper by Mohammad Barzgari, a postdoc in the MIT Research Laboratory of Electronics (RLE); Haibo Yang, an EECS graduate student; and senior author Negar Reiskarimian, the X-Window Consortium Career Development Assistant Professor in EECS at MIT and a member of the Microsystems Technology Laboratories and RLE. The research was recently presented at the IEEE Radio Frequency Integrated Circuits Symposium.
A new standard
A receiver acts as the intermediary between an IoT device and its environment, where its job is to detect and amplify a wireless signal, filter out interference, and then convert it into digital data for processing.
Conventionally, IoT receivers operate on fixed frequencies and suppress interference using a single narrow-band filter, which is simple and inexpensive.
But the new technical specifications of the 5G mobile network enable reduced capability devices that are more affordable and energy efficient, subsequently opening up a range of IoT applications to the faster data speeds and increased network capabilities.
These IoT devices require receivers that can tune across a wide range of frequencies while remaining low power and cost-effective.
“This is extremely challenging because now we need to not only think about the power and cost of the receiver, but also flexibility to address numerous interferers that exist in the environment,” said Araei.
To reduce the size, cost, and power consumption of an IoT device, engineers can’t rely on the bulky, off-chip filters that are typically used in devices that operate on a wide frequency range.
One approach is to use a network of on-chip capacitors that can filter out unwanted signals, but these networks are prone to signal noise, known as harmonic interference.
Previously, the MIT researchers developed a novel switch-capacitor network that targets these harmonic signals as early as possible in the receiver chain, filtering out unwanted signals before they are amplified and converted into digital bits for processing.
Shrinking the circuit
The researchers extended that approach by using the novel switch-capacitor network as the feedback path in an amplifier with negative gain. This kind of configuration leverages the Miller effect; enabling small capacitors to behave like much larger ones.
“This trick lets us meet the filtering requirement for narrow-band IoT without physically large components, which drastically shrinks the size of the circuit,” explained Araei.
The receiver has an active area of less than 0.05 square millimetres.
One challenge the researchers had to address was determining how to apply enough voltage to drive the switches while keeping the overall power supply of the chip at only 0.6 volts.
In the presence of interfering signals, such tiny switches can turn on and off in error, particularly if the voltage required for switching is extremely low.
To prevent this, the researchers used a special circuit technique called bootstrap clocking. This method boosts the control voltage just enough to ensure the switches operate reliably while using less power and fewer components than traditional clock boosting methods.
Together, these innovations allow the new receiver to consume less than a milliwatt of power while blocking out 30 times more harmonic interference than traditional IoT receivers.
“Our chip also is very quiet, in terms of not polluting the airwaves. This comes from the fact that our switches are very small, so the amount of signal that can leak out of the antenna is also very small,” Araei added.
Because this receiver is smaller than traditional devices and relies on switches and precharged capacitors as opposed to more complex electronics, it could be more cost-effective to fabricate. Additionally, since the receiver design can cover a wide range of signal frequencies, it could be implemented on a variety of current and future IoT devices.
Now the researchers have developed this prototype, they want to enable the receiver to operate without a dedicated power supply, perhaps by harvesting Wi-Fi or Bluetooth signals from the environment to power the chip.
There’s plenty of other editorial on our sister site, Electronic Specifier! Or you can always join in the conversation by visiting our LinkedIn page.
